- Click Here To Know More About:
- Blinds In Sydney
By John Schofield
There are many types of window blinds that you can buy. These blinds are important in protecting your home from the glare of the sunlight. You can also keep your privacy from the world outside if the blinds are properly closed. These window blinds are also effective in insulating a room because they can maintain a hot or cold temperature, as you want it. There are even different colours and designs in window blinds to make them more appealing. You can find these window blinds in two basic types – horizontal and vertical blinds. Horizontal blinds are called as venetian blinds while the vertical ones are called as track blinds. The former are usually used in regular sized windows while the latter are used in large windows and doors.
The classification of these window blinds can also be based on the size of the blinds. They can be classified as solid window blinds and slat window blinds. Solid window blinds are made out of a single material without any thin shade panels. The best examples for solid window blinds are curtains. They can be rolled up and even folded just like slat window blinds. On the other hand, slat window blinds are called mini window blinds. The slats are connected to one another through the use of strings. The other types of window blinds are faux wood blinds and Roman blinds.
If you are interested in using these window blinds at home, you have to make sure that they are installed right. You have the option to it on your own or to let the professionals do it. However, the process of installing the window is simple. Many homeowners save themselves some money by doing the installation on their own. Here are the steps in installing window blinds:
1. The blinds need to be installed inside the window frame. To start, mark the position of the blinds on the frame, where you want the blinds to be mounted on. This will ensure that the installation will go right.
2. Drill the holes of the screws, which will hold the brackets as they are placed on the window frame. Once you are done drilling the holes, insert and put the screws and put the brackets right on the frame of the window. Do this procedure again in installing the bracket for the other side of the frame.
3. Most window blind kits have pelmet or valance. The valance in the kits is usually placed on the head rails. If the valance is not attached to the head rails, you have to do it yourself. You can use the clips to do this. There are some window blind kits that come with bottom rails. Attach these rails properly. If you use valance clips, make sure that they don not bother the way the blinds roll.
4. Adjust the window blinds’ cord stops. These cords should be at least two inches when measured from below the head rails.
These are fairly simple steps to follow, which you can do alone.
About the Author:
Venetian blindswindow blinds
Source:
isnare.com
Permanent Link:
isnare.com/?aid=879367&ca=Advice